Panasonic KX-L6CL - Manual (Page 19)

19
Operating the built-in answering device
2
When receiving a call, a greeting message will be
played and the unit will record a voice message.
● To record your own greeting message, see page 18.
Activating the answering device
Operating the answering device
from a remote location
1
Turn the (Auto answer) light on by pressing .
Listening to recorded messages
When new messages are recorded, the (Auto
answer) light will flash.
1
Press to listen to the recorded messages.
Listening to all of the recorded
messages
Erasing all of the recorded
messages
1
Press (Menu) and .
2
Press (Stop).
Erasing your own greeting
message
2
Press (Stop).
● The pre-recorded Japanese greeting message will
be played when you receive a call.
Preparation: Programming the remote operation ID
1. Press (Menu) and .
2. Enter any 4-digit number (remote operation ID) except
or #.
3. Press (Set).
4. Press (Stop).
Operation: Listening to a recorded message from a
remote location
Turn the (Auto answer) light on before you go out.
Remote operations are available only from a touch tone
telephone.
1. Call your unit.
2. Press during the greeting message, then enter
the remote operation ID and .
3. Press .
● The recorded messages will be played back.
1
Press (Menu) and .
Press (Replay/Record).
2
To erase the messages, press (Set) within
10 seconds after playing back.
To save the messages, press (Stop).
To erase all the recorded messsages, press
.
To stop playing back, press (Stop).
While a message is played back, the following
operations are available:
To listen to the next message, press
(right).
To listen to the previous message, press
(left).
To play back faster, press .
To play back slowly, press .
To erase the message being played back, press
.