Palsonic DVD4000 User Manual
Page 10
System Connection
Audio Connection
The unit supports two choices of audio output Analog Audio and Digital Audio. Analog Audio is
stereo (2 channel). Digital Audio provides optical and coaxial outputs. Digital Audio provides 5.1
channels using an external decoder.
Stereo Output
Connect the audio cable to the audio out of the unit and to the stereo input of the TVor amplifier.
Coaxial Output
Connect a coaxial cable
to the coaxial output
of
the unit and to the corresponding digital input of your
decoder/amplifier.
Connect an optical cable to the optical output of the unit and to the corresponding digital
input of your decoder/amplifier.
Optical output
Note:
Select the type of connection depending on your peripheral equipment.
If a decoder/amplifier with coaxial or optical inputs is available, you can enjoy DTS and Dolby Digital
soundtracks
Please refer to the instructions of your other equipment, and power off the unit and the other
equipment before connecting.
8
Getting Started
.
.
.
.
.
.
.