Controls and features, Rear, Cont'd) – Panasonic BT-S950P User Manual
Page 6: Rear panel, 15 video a terminals, 16 video b terminals, 17 ext sync terminals, 18 audio a terminals, 19 audio b terminals, 20 afc switch
6
15 VIDEO A terminals
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN
: Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO A
terminals
*
.
* Also refer to the Basic Connection Example on page 8.
16 VIDEO B terminals
Video signal input (IN) and output (OUT) terminals for
both composite and S-VIDEO (Y/C) terminals. Each
output terminal is bridge-connected.
[BNC terminals]
IN
: Video signal input terminal
OUT : Bridge-connected video signal output terminal
[S-VIDEO (mini-DIN 4-pin) terminals]
IN
: S-VIDEO (Y/C) signal input terminal
OUT : Bridge-connected S-VIDEO signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO B
terminals
(
.
* S-VIDEO (Y/C)- terminal has priority.
* Also refer to the Basic Connection Example on page 8.
Ⅵ
S-VIDEO terminal pin layout
22
23
25
24
OUT
IN
OUT
IN
S-VIDEO
AFC
NORMAL
FAST
OUT
IN
SERVICE
CUT OFF
B
1
R
G
DRIVE
R
G
VIDEO A
OUT
IN
EXT SYNC
AUDIO
TALLY/
REMOTE
OUT
IN
VIDEO B
AC IN
DC IN
12V
2
2
1
THIS APPARATUS
MUST BE EARTHED
+
-
LINE B
LINE A
WARNING
Rear
< Rear Panel >
20
21
19
18
17
16
15
OUT
IN
OUT
IN
S-VIDEO
AFC
NORMAL
FAST
OUT
IN
VIDEO A
OUT
IN
EXT SYNC
AUDIO
TALLY/
REMOTE
OUT
IN
VIDEO B
LINE B
LINE A
To AC outlet
(120 V AC, 50 Hz/60 Hz)
Pin No. Signal
1
GND (Y)
2
GND (C)
3
Y
4
C
17 EXT SYNC terminals
External sync signal input (IN) and output (OUT)
terminals.
The output terminal is bridge-connected.
IN
: Input terminal for the external sync signal
OUT : Bridge-connected output terminal
Note:
* Also refer to the Basic Connection Example on page 8.
18 AUDIO A terminals
Input (IN) and output (OUT) terminals for the audio signal
corresponding to the VIDEO A terminals
%
.
The output terminal is bridge-connected.
IN
: Audio input terminal
OUT : Bridge-connected output terminal
Note:
* For corresponding video signals, use the VIDEO A
terminals
%
.
19 AUDIO B terminals
Input (IN) and output (OUT) terminals for the audio signal
corresponding to the VIDEO B terminals
^
.
The output terminal is bridge-connected.
IN
: Audio input terminal
OUT : Bridge-connected output terminal
Note:
* For corresponding video signals, use the VIDEO B
terminals
^
.
20 AFC switch
Selects the AFC (Automatic Frequency Control) time
constant for the horizontal sync circuit.
Correct the skewed portion of the picture.
NORM position : Normal mode
FAST position : Fast mode (fast: smaller time constant)
3
OUT
IN
S-VIDEO
1
4
2
3
1
4
2
CONTROLS AND FEATURES
(cont'd)
LCT1182-001A-H (EN)Letter Size
02.3.15, 12:24 PM
Page 6
Adobe PageMaker 6.0J/PPC