Philips HTS4600 - Manual (Page 22)

22 EN
7
Select [ OK ] in the menu, then press OK
to start scanning of devices.
Once complete, audio input mapping
menu is displayed.
Coaxial In
AUX
HDMI Input Mapping
TV
Other (Non-HDMI)
For example, if your TV audio is
connected to the AUX IN sockets on
this unit, select [ AUX ] and map onto
the correct device (brand name) shown
at the right panel.
8
Select the audio input of this unit that is
used to connect to other HDMI device
(e.g. AUX, Coaxial In), then press B.
9
Select the correct device that connected
to this audio input, then press OK.
Repeat steps 8~9 to map other
connected devices.
10
To exit the menu, press OPTIONS.
•
•
Select a play source
On the main unit
1
Press SOURCE button repeatedly to
select: DISC > FM > AUX > DI > MP3
LINK >
DISC ...
On the remote control
Press DISC to switch to DISC mode.
Press USB to switch to USB mode.
Press RADIO to switch to FM band.
Press AUX / MP3 LINK repeatedly to listen
to the audio output from the external
device.
Display Device connected to
AUX AUX IN sockets.
DI DIGITAL IN-COAXIAL
socket.
MP3 LINK MP3 LINK socket.
•
•
•
•