Patton electronic SL4020 - Manual (Page 41)

Routing 41
SmartLink 4020 User Manual 5 • Network—LAN
Routing
These configuration parameters are for the internal router.
Note These parameters only apply when the Device Operating Mode is set to Router
(see section
“Device Operating Mode” on page 32).
Figure 17. Router Configuration window
Dynamic Routing
Whether or not dynamic routing on the interfaces is enabled/disabled.
Static Routing
Under Static Routing, you can specify the routing paths of your internal network.
Viewing the Routing Table
Click the View Routing Table button to display the Routing Table (see figure 18 ).
Figure 18. Routing Table window
Saving your work
When you are finished configuring Router settings, click the Save Router Settings button (see figure 17 on
page 41) to save the changes.