Paralan iS550 User Manual
Page 10
Advertising
Page 10
1.10 You should now be at the Home page. Click on the “iSCSI Target” tab.
1.11 Now you can start configuring your unit for your final iSCSI topology (See
section 1.16 Figure B). Modify the iSCSI Target Port settings accordingly.
Ensure that the iSCSI Host computer and the iS5xx iSCSI Bridge are on the
same subnet.
This subnet must match the iSCSI Host
machine wishing to access the SCSI devices
connected to the iS5xx iSCSI Bridge.
The correct Gateway number must be
entered if using a Gateway to reach the iS5xx.
Otherwise, leave blank.
Advertising