Warning/alarm indications, Notes and hints – Panasonic AG-DVC7P User Manual
Page 42
42
O
O
O
O
tt
tt
h
h
h
h
e
e
e
e
rr
rr
s
s
s
s
O
O
O
O
tt
tt
h
h
h
h
e
e
e
e
rr
rr
s
s
s
s
Warning/Alarm Indications
If any one of the following indications lights up or
flashes, please check the condition of the Camera
Recorder.
BLANK:
Blank Search -34-
DEW DETECT, EJECT TAPE:
Condensation has occurred. -47-
CHECK REC TAB:
The accidental erasure prevention
slider on the inserted Cassette is open
(that is, set to [SAVE]).
You are about to do audio dubbing on
the unrecorded (blank) portion of the
tape.
No Cassette is inserted. -14-
:
The Battery is low. Recharge it. -12-
:
The video heads are dirty. -47-
END:
The tape came to end during recording.
CHECK REMOTE MODE:
Wrong Remote Controller Mode has
been selected. -11-
INCOMPATIBLE DATA:
You are attempting to play back a tape section
that has been recorded with a different TV
system.
CANNOT REC LP-MODE:
Because the original recording was done in LP
Mode, audio dubbing cannot be performed.
INCOMPATIBLE TAPE:
This Cassette is incompatible.
PUSH THE RESET BUTTON:
Mechanism Irregular is detected. Press the
[RESET] Button (-8-). This may solve the
problem.
NEED TO BE SERVICED:
It is a malfunction.
INCOMPATIBLE DATA:
Because the medium is protected by a copy
guard, images cannot be recorded correctly.
Notes and Hints
$
Concerning the Power Supply
O
When the Camera Recorder is used for a long time,
the Camera body becomes warm, but this is not a
malfunction.
O
If the [CHARGE] Lamp does not light up although
the Battery is attached to the AC Adapter, detach
the Battery and reattach it.
O
Battery CGP-D110 and CGP-D105 cannot be
charged with this AC Adapter.
$
Inserting/Removing the Cassette
O
In the case of using a previously recorded Cassette,
you can use the Camera Search Function to find
the position where you want to continue recording.
O
If a new Cassette is inserted, rewind to the
beginning of the tape before starting recording.
O
When inserting the cassette, make sure it faces in
the right direction and then push it in until it stops.
$
Alarm Sounds
When [BEEP SOUND] on the [OTHER FUNCTIONS]
Sub-Menu on the [CAMERA FUNCTIONS] Main-
Menu is set to [ON], confirmation/alarm beeps are
issued as follows.
1 Beep
O
When you start recording
O
When you switch the [OFF/ON] Switch from [OFF]
to [ON]
2 Beeps
O
When you pause recording
2 Beeps a4
O
If you perform a wrong operation before or during
recording
$
Recording
O
Before turning on the power, remove the Lens Cap.
If the Lens Cap is still attached when the power is
turned [ON], Automatic White Balance Adjustment
(-27-) may not function correctly.
$
Recording Check
O
For Recording Check, the recording speed mode
(SP/LP) must be the same as the mode used for
the recording. If different, playback images will be
distorted.
$
Camera Search
O
In Camera Search Mode, images may contain
mosaic-pattern noise. This is a phenomenon that is
characteristic of digital video and not a malfunction.
O
If the recording speed modes (SP/LP) of previous
recording and new recording are different, playback
images may be distorted.
$
Photoshot
O
Photoshot Recording results in slightly inferior
image quality.