Polaris 800 Dragon SP - Manual (Page 69)

66
OPERATION
Engine Break-In
No single action on your part is as important to long, trouble-free
machine life as proper break-in of a new or rebuilt engine. Premix the
first tank of fuel with one pint of Polaris injection oil for each five gal-
lons of fuel. This, in addition to the lubrication supplied by the injection
system, will assure proper engine break-in.
NOTICE: Excessive heat build-up during the first three hours of operation will
damage close-fitted engine parts. Do not operate at full throttle or high
speeds for extended periods during the first three hours of use. Vary
the throttle openings and machine speeds to reduce friction on all
close-fitting machined parts, allowing them to break in slowly without
damage.
Use of any lubricants other than those recommended by Polaris may
cause serious engine damage. We recommend the use of Polaris
lubricants for your vehicle.
Drive with extra caution during the break-in period. Perform regular
checks on fluid levels, lines, and all other important areas of the
machine.