Pitney Bowes DM230L - Manual (Page 22)

SV61891 Rev. A 1-7
DM230L, DM330L, DM350L Operating Guide
Important Safety
Notes
continued…
• The power cord wall plug is the primary means of disconnecting the
machine from the AC supply.
• Do not use an adapter plug on the line cord or wall outlet. Do not
remove the ground pin from the line cord.
• Avoid using wall outlets controlled by wall switches or shared with
other equipment. Your mailing machine performs periodic maintenance
cycles automatically to assure best print quality; leave it ON at all
times. Do not route the power cord over sharp edges, or allow it to be
trapped between furniture and/or furniture and the wall.
• Avoid touching moving parts or materials while the machine is in
use. Keep hands, loose clothing, jewelry, and long hair away from all
moving parts.
• Keep your hands out of the ink cartridge refill holder.
• Do not remove covers. Covers enclose hazardous parts that should
only be accessed by properly trained service personnel.
• Before clearing a stall, be sure machine mechanisms come to a stop.
When removing stalled material, avoid using too much force to protect
against minor personal injury and damaging equipment.
• Immediately report to Pitney Bowes Service any damaged or
non-functioning components. The unit may be unsafe for use.
• To prevent overheating, do not cover the vent openings. At times vent
openings may not be visible, but still allow ample spacing around the
unit for ventilation.
• Do not place lighted candles, cigarettes, cigars, etc., on the mailing
machine.
NOTE: Always follow the specific occupational safety and health standards for
your workplace.