Panasonic KX-FL501 - Manual (Page 49)

49
Receiving Faxes
Pager call - when the unit receives a fax !
This feature allows your unit to call your pager when your unit receives a fax document.
1 Press .
Display:
2 Press , then .
3 Press .
4 Rotate to select “ON”.
● If this feature is not required, select
“OFF”.
5 Press .
6 Enter your pager number up to 30 digits.
Example:
7 Press .
8 Enter your pager access code up to 10
digits if required.
Example:
9 Press .
● The default code 07734 will show “Hello!”
on your pager.
● If you want to change this message,
enter your message up to 30 digits.
Example:
10 Press .
● The unit will dial the stored number.
PAGER TEST
SET
MSG.=5555
MSG.=07734
SET
PIN=12345678
PIN=
SET
NO.=12025551234
NO.=
SET
MODE=ON
JOG DIAL
MODE=OFF
SET
FAX PAGER CALL
7 0
SYSTEM SET UP
MENU
MONITOR
MENU Display
JOG DIAL SET
5555
Pager
Your pager will display the message you
entered in step 9. (For example: 5555)
When your pager receives a pager call
11 Check that your pager received
the pager test call.
12 Press . MONITOR
Note:
● If you have subscribed to a Caller ID service,
your pager will display the caller’s telephone
number instead of the message.