Panasonic CT-27SC13 - Manual (Page 14)

12 l
I C ON M ENU O PERATION
E
N
G
L
IS
H
Other Adj.
Note: While highlighted, press VOL u to select or activate
feature.
r COLOR TEMP (temperature) - To increase or
decrease WARM (red) and COOL (blue) colors to suit
personal preferences.
TIMER
Clock Set
r TIME - Set the time of the day.
r DAY - Set the day of the week.
Procedure
Note: Use t VOL , VOL u and CH q to set time and day.
Sleep
r How Long? - Select 30, 60 or 90 minutes for TV to turn
off. Select NO to turn off Sleep timer.
Timer 1 and Timer 2
Select one or both timers to turn the television on and off at
selected times, on selected channels, and on selected
days.
Procedure
• Use the VOL u and CH q to set day, On Time, Off
Time and Channel number, then use the VOL u to
activate.
Notes:
• The television automatically turns OFF after 90 minutes
when turned ON by the TIMER. If the OFF time is
selected or if a key is pressed, the automatic OFF after
90 minutes will becancelled.
• The TIMER is active when the television is OFF or ON.
The television will switch to the selected channel at the
selected time set in the TIMER.
CHANNELS
Favorites
r CHANNEL SCAN FAV - To enter up to 16 favorite
channels.
Note: Use remote numeric keypad to select desired FAV
channels.
r CHANNEL SCAN ALL - To scan all channels when
using the CH up/down buttons.
Caption
r MANUAL CAPTION - To enter numbers and captions
manually.
Note: Use the remote numeric keypad to select desired
channel (refer to your local TV guide).
r INPUT LABEL - To label video input connections for
onscreen display.
Procedure
• Press CH p or CH q select the desired Video input.
• Press t VOL or VOL u to select the first character.
• Press CH q to enter the next position and repeat the
step above to enter the next character.
• Repeat above steps until all characters are entered.
Video Input Skip Feature
This receiver has a Video Input Skip Feature, which will
allow the user to skip desired input modes when pressing
TV/VIDEO button.
Procedure
• Press t VOL while the first character is highlighed to
skip selected video input.
r To delete skip feature, press the VOL u button while the
desired video input mode is highlighted.