Planar XP17WSA - Manual (Page 25)

TV (VCR) Problem
Can’t play the TV
Cause
○ 1
Incorrect antenna connection.
Solution ○ 1 Connect the antenna correctly.
Cause ○ 2 Channels not set correctly.
Solution ○ 2 Refer to [Settings for TV Viewing](P18) to set channels.
Can’t hear the sound
Cause
○ 1
Incorrect audio cable connection.
Solution ○ 1 Connect the audio cable correctly.
Cause ○ 2
Volume is set at the lowest value.
Solution ○ 2 Refer to [Change the Volume] (P18) for volume adjustment.
PIP(Picture In Picture) Problem
No PIP image
Cause
○ 1
Incorrect PIP setting for display image (TV, S-Video, Video1, Video2).
Solution ○ 1 Perform the following steps to change the specified image:
1. Refer to [Activate PIP Function] (P19) for display of PIP screen.
2. Press OSD MENU button (or MENU on the remote) to display OSD
Main Menu.
3. Use e/f button (or Е/Ж on the remote) to select [PIP] option, then
press OSD MENU button (or MENU on the remote) again.
4. Use e/f buttons (or Е/Ж on the remote) to select [Set PIP Screen],
then press -/+ buttons (or↓/↑ on the remote) to select the desired
image.
Cause ○ 2
Incorrect channel setting.
Solution ○ 2 Refer to [Settings for TV Viewing](P18) to set channels.
24