Philips KONINKLIJKE AZ5740 - Manual (Page 30)

Tip
When you play or record a tape, the sound source cannot be •
changed.
The best recording level is set automatically. Change of volume and •
sound effect does not affect recording.
Note
The quality of recorded sound can differ depending on the source •
and the tape used.
Record from disc to tape
1
Press STOP/OPEN to open the tape door.
2
Load a tape.
3
Push the source selector on the main unit to DISC to select
disc source.
4
Load a disc.
5
Start disc playback.
6
Press RECORD to start recording.
To stop recording, press • STOP/OPEN .
Record from radio to tape
1
Press STOP/OPEN to open the tape door.
2
Load a tape.
3
Push the source selector on the main unit to FM.
4
Adjust VOLUME to tune to the desired radio station.