Philips HTS3540/93 - Manual (Page 16)

14
7 Update software
To check for new updates, compare the current
software version of your home theater with the
latest software version (if available) on the Philips
web site.
Check software version
1
Press - .
2
Select [Preference Setup] > [Version Info.],
then press OK.
» The software version is displayed.
Update software from a CD-R
or USB
1
Check for the latest software version on
www.philips.com/support.
• Search for your model and click on
‘software&drivers’.
2
Download the software onto a CD-R or
USB storage device.
3
Insert the CD-R or connect the USB
storage device to the home theater.
4
Follow the instructions on the TV to
confirm the update.
» When complete, the home theater
automatically switches off and on again.
• If not, disconnect the power cord for a few
seconds and then reconnect it.
Caution
• Do not turn off the power or remove the
CD-R or USB storage device when the
software update is in progress because you
might damage the home theater.
Change preference settings
1
Press - .
2
Select [Preference Setup], then press OK.
3
Select and adjust the following settings:
• [Audio] : Selects audio language for
video.
• [Subtitle] : Selects subtitle language for
video.
• [Disc Menu] : Selects menu language
for video disc.
• [Parental] : Restricts access to discs
that are recorded with ratings. To
play all discs irrespective of the rating,
select level ‘8’.
• [PBC] : Displays or skips the content
menu for VCD and SVCD discs.
• [MP3/JPEG Display] : Displays the
MP3/JPEG folders or all the files.
• [Password] : Sets or changes a PIN
code to play a restricted disc. Enter
‘0000’ if you do not have a PIN or if
you have forgotten your PIN.
• [DivX Subtitle] : Selects a character
set that supports the DivX subtitle.
• [Version Info.] : Displays the software
version for the home theater.
• [Default] : Resets the home theater to
the default settings programmed at the
factory.
4
Press OK to confirm your choice.
Note
• If your preferred disc language is not available,
you can select [Other] from the list and enter
the 4-digit language code which can be found
at the back of this manual.
• If you select a language that is not available
on a disc, the home theater uses the default
language of the disc.
• You cannot reset disc lock, password (PIN
code) and parental control settings to their
default values.
EN