6 other features, Set sleep timer, Play audio from an external device – Philips AJ7040D User Manual

Page 15: Adjust display brightness, Set alarm timer

Advertising
background image

9

To stop the ringing alarm, press the

corresponding AL1 / AL2 .
The alarm repeats ringing for the

next day.

Snooze alarm

When alarm sounds, press SNOOZE .

The alarm snoozes and repeats ringing

»

nine minutes later.

To adjust alarm interval (in minutes), press
SNOOZE repeatedly.

Set sleep timer

This clock radio can switch to standby mode
automatically after a preset period.
Press SLEEP repeatedly to select the sleep
timer period (in minutes).

When the sleep timer is activated,

»

appears.

To deactivate the sleep timer, press SLEEP
repeatedly until [OFF] (off) appears.

Play audio from an external
device

You can listen to audio from an external device
through this clock radio.

1

Connect the MP3 link cable to:

the

MP3 LINK socket.

the headphone socket of an external

device.

2

Press

MP3 LINK to select MP3 link source.

3

Start to play the external device (see the
user manual of this device).

Adjust display brightness

Press BRIGHTNESS repeatedly to select
different brightness levels.

15 30 60 90 120

off

6 Other

features

Set alarm timer

Set alarm

In standby mode, you can set two alarms to
ring at different time.

Note

Make sure that you have set the clock

correctly.

1

Press and hold AL1 / AL2 for two seconds
to activate alarm setting mode.

The hour and minute digits begin to

»

blink.

2

Press

/ and

/

repeatedly to set

the hour and minute.

3

Press

AL1 / AL2 to conÀ rm.

Select alarm source

Note

For alarm sound, you can select buzzer, your

last listened radio chanel, or latest played
audio in your iPod/iPhone.

Adjust AL1/2 RADIO·BUZZ·DOCK control
to select alarm source for both alarms.

Tip

When alarm time comes, the selected radio,

buzzer, or iPod/iPhone turns on.
If iPhone is selected as alarm source, while

no iPod/iPhone is connected, the clock radio
switches to buzzer source instead.

Activate/deactivate alarm timer

1

Press

AL1 / AL2 to view alarm settings.

2

Press

AL1 / AL2 again to activate or

deactivate the alarm timer.

The alarm icon appears if alarm timer

»

is on and disappears if it is off.

English

EN

Advertising
This manual is related to the following products: