Panasonic KX-FLM551 - Manual (Page 33)

33
Sending Faxes
Sending the same document to pre-programmed parties
1 Insert the document FACE DOWN.
● If necessary, press u
repeatedly to select the desired setting
(p. 28).
2 Press the desired a (1–2) or
HI
.
● You can also use n . Display the
desired key name, and press
i .
Example:
● The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each entry, calling each
number sequentially.
● After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report.
<BROADCAST1>
FACE DOWN
RESOLUTION STOP
JOG DIAL
FAX START
SET
BROADCAST
MANUAL BROAD
Note:
● If you select the “FINE”, “SUPER FINE” or “PHOTO”
resolution, the number of pages that the unit can
transmit will decrease.
● If the document exceeds the memory capacity (p. 75),
sending will be canceled.
● If one of the entries is busy or does not answer, it will
be skipped. All skipped entries will be redialed up to 2
times after all of the other entries have been called.
To cancel the broadcast setting
1. Press { while the unit displays the following.
Display:
● The display will show the following.
/
2. Press w .
YES:SET/NO:STOP
SEND CANCELED?
BROADCASTING