Philips 25TS56C1 - Manual (Page 18)

SET CLOCK 10:00 AM
TIMER ACTIVE OFF
CHANNEL 12
START TIME - - : - - AM
POWER
SLEEP CLOCK CC
1 2 3
6 5 4
7 8 9
0 A/CH SURF
STATUS
EXIT MENU
MUTE
CH VOL
2
1
3
SET CLOCK 10:00 AM
TIMER ACTIVE ON
CHANNEL 12
START TIME - - : - - AM
J ust like an alarm clock you can
set the TV to turn itself on at the
same time everyday.
Press the CLOCK button to
display the Clock onscreen menu.
Press the CURSOR UP ▲ or
CURSOR DOWN ▼ button until
the words TIMER ACTIVE are
highlighted..
Press the CURSOR RIGHT
ᮣ or CURSOR LEFT ᮤ button
to select ON (if activating) or OFF
(if deactivating) the Timer control.
A
CTIVATING THE
TV’
S
O
N
T
IMER
C
ONTROL
S
MART
H ELP
Remember: Be
sure to set the
clock to the current
time, then set the time
you want the television
to turn on using the
START TIME control
as described on the next
page.
The onscreen menu will
time out and disappear
from the screen when
you finish, or you can
press the
STATUS/EXIT button
to clear the menu from
the screen.
BEGIN
SET CLOCK - - :- - AM
TIMER ACTIVE ON
CHANNEL 12
SET CLOCK 10:00 AM
TIMER ACTIVE ON
CHANNEL 12
POWER
SLEEP CLOCK CC
1 2 3
6 5 4
7 8 9
0 A/CH SURF
STATUS
EXIT MENU
MUTE
SMART SMART
SOUND PICTURE
CH VOL
2
3
4
1
Y our television comes with an
onscreen clock. During normal
operation the clock appears on the
screen when the STATUS/EXIT button
is pressed or when channel changes
occur.
Press the CLOCK button on the
remote to display the onscreen
CLOCK menu.
Press the CURSOR UP ▲ OR
CURSOR DOWN ▼ buttons until
the words SET CLOCK are highlight-
ed.
Enter the current time using the
NUMBERED buttons. If the first
number is a single digit first enter a
zero then the digit (i.e., press “0”, then
press “8”).
Press the CURSOR RIGHT ᮣ
or CURSOR LEFT ᮤ buttons to set
either AM or PM time.
S
ETTING THE
TV’
S
C
LOCK
S MART
H ELP
Remember: Be
sure to press “0”
first and then the hour
number for single digit
entries.
To clear the onscreen
menu press the STA-
TUS/EXIT button or
wait a few seconds after
you have finished your
adjustment and the
menu will automatically
disappear from the
screen.
BEGIN
Note: The CLOCK onscreen menu can
also be accessed through the main menu
by pressing the MENU button; then
scrolling up/down with the CURSOR
UP ▲ or CURSOR DOWN ▼ buttons
until the word CLOCK is highlighted.
Press the CURSOR RIGHT
ᮣ button
to activate the CLOCK menu and follow
the steps above to set the time.
Note: If a power failure occurs, the
TV's CLOCK will have to be reset.
If no time is set, the time will not
appear onscreen.