Pioneer XRB3089-A - Manual (Page 63)

Other connections 10
63
En
English
Français
Deutsch
Nederlands
Italiano
Español
• Use a 3-ringed miniplug SR+ cable
1
to
connect the CONTROL IN jack of this receiver
with the CONTROL OUT of your plasma
display.
Before you can use the extra SR+ features, you
need to make a few settings in the receiver. See
SR+ Setup for Pioneer plasma displays on
page 66 for detailed instructions.
To make the most of the SR+ features, you
should connect your source components (DVD
player, etc.) in a slightly different way to that
described in this chapter. For each
component, connect the video output directly
to the plasma display, and just connect the
audio (analog and/or digital) to this receiver.
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a
number of features become available to make
using this receiver with your Pioneer plasma
display even easier. These features include:
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the
plasma display.
• Automatic volume muting on the plasma
display.
2
See also SR+ Setup for Pioneer plasma
displays on page 66 for more on setting up the
receiver.
1 Make sure that the plasma display and
this receiver are switched on and that they
are connected with the SR+ cable.
See Using this receiver with a Pioneer plasma
display above for more on this.
2 To switch SR+ mode on/off, press
RECEIVER , then the SR+ button.
The front panel display shows SR+ ON or OFF .
Note
1 • The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer
Customer Support division for more information on obtaining an SR+ cable (you can also use a commercially available 3-
ringed mini phone plug for the connection).
• If you connect to a Pioneer plasma display using an SR+ cable, you will need to point the remote control at the plasma
display remote sensor to control the receiver. In this case, you won’t be able to control the receiver using the remote control
if you switch the plasma display off.
DVD player
VSX-918V
Pioneer plasma display
Satellite receiver, etc
VIDEO
INPUT 1
VIDEO
INPUT 2
TV/SAT
AUDIO IN
DVD/BD
AUDIO IN
MASTER
VOLUME
VSX-918V
STANDBY/ON
PHONES
DVD DVR TV VIDEO/PORTABLE CD/CD-R iPod FM/AM XM
SPEAKERS VSB MODE SIGNAL
SELECT SOUND RETRIEVER
SIRIUS AUX
PHASE CONTROL
INPUT SELECTOR
ADVANCED
SURROUND STEREO / A.L.C. STANDARD
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
ACOUSTIC EQ PHASE CONTROL AUTO SURR / STREAM DIRECT
MCACC PORTABLE iPod DIRECT AUDIO R L VIDEO
DIGITAL PRECISION PROCESSING
2 The automatic volume muting feature is enabled separately; see SR+ Setup for Pioneer plasma displays on page 66.
RECEIVER
INPUT SELECT
TV CTRL
SOURCE
TV DVR
SIRIUS
AM
XM
FM
CD-R
CD
PORTABLE
iPod DVD
RECEIVER
MULTI CONTROL
STEREO/
TV CONTROL
MPX
DIMMER
iPod CTRL
SLEEP
D.ACCESS
SIGNAL SEL
TV CH INPUT
SELECT
TUNER DISP CLASS
DISC
SR +
ENTER
INFO
SHIFT TV VOL
MIDNIGHT ANALOG ATT
+ 10
VSX_918_818_KU.book 63 ページ ２００７年１１月２８日 水曜日 午後６時５８分