Play, Main unit, The unit’s display – Panasonic DMR-BW500 User Manual
Page 13
13
RQT9131
1Standby/on switch (
Í/I) (
➡ 18)
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
2Disc tray (
➡ 15)
3Connection for digital video (DV) camcorder (
➡ 56)
4SD Card LED
≥It is possible to set the LED to turn on/off. (
➡ 86, SD Card LED
Control)
5Display (
➡ below)
6Recording indicator
7Remote control signal sensor
8Connection for VCR, camcorder etc. (
➡ 55, 56)
9Open/close disc tray (
➡ 15)
:SD card slot (
➡ 15)
;USB port (
➡ 15)
<Channel select (
➡ 23)
=Start recording (
➡ 23)/Specify a time to stop recording (➡ 23)
>Stop (
➡ 23, 38)
?Start play
Rear panel terminals (
➡ 16, 17, 94–98)
1Copying indicator
2SD card slot indicator
3USB port indicator
4Disc indicator
5Timer recording indicator
6Drive (HDD, BD or SD) indicator
7Main display section indicator
8Playback indicator
≥Indicators for functions that this unit does not support will not light.
Main unit
Pull to flip down the front
panel.
The unit’s display
PLAY
SD USB
Con
tr
o
l r
e
fe
re
nc
e
guide
DMRBW500GN-RQT9131-L_eng.book 13 ページ 2008年5月12日 月曜日 午前9時37分