Paradyne Hotwire Routers - Manual (Page 69)

Configuration Defaults & Command Line Shortcuts
B-3 6371-A2-GB20-10 August 2000
Command Line Input Shortcuts
Text in bold is the minimum input for each command line entry.
Table B-2. Command Line Input Shortcuts (1 of 3)
1483encap [llc | vc]
admin {disable | enable}
arp create <ip–addr> <mac–addr>
arp delete <ip–addr>
arp timeout complete [<time>]
arp timeout incomplete [<time>]
arp purge
autologout {disable | enable}
configure {factory | terminal}
console {disable | enable}
clear statistics [dsl1 | eth1 | ip]
delete {dsl1[:ifn] | eth1[:ifn]}
dhcp relay {disable | enable}
dhcp relay address <ip–addr>
dhcp server {disable | enable}
dhcp server address <lower–ip> <upper–ip> [<ip–mask>]
dhcp server leasetime <min–time> <max–time>
dhcp server name <name>
dhcp server nameserver <ip–addr>
dhcp server router <ip–addr>
exit
frame [dix | 802.3]
help
ifn address {dsl1[:ifn] | eth1[:ifn]} <ip–addr> <ip–mask> [primary]
ifn address dsl1 unnumbered
ifn {dsl1[:ifn] | eth1[:ifn]} primary
ip multicast {disable | enable}
ip processing {disable | enable}
ip route create <dest–ip> <dest–mask> <next–hop–ip>