What’s in the box, Connect, Install – Philips SE 745 User Manual
Page 2: Enjoy
Connect
Connect the base station
Install
Insert rechargeable batteries and charge
1
1. Place the base station in a central location near the telephone line socket and electricity socket.
2. Place the base station face down so that you can see the bottom of the base station. Attach the base
support to your base station by fitting the tabs of the base support into the corresponding slots on
the base unit. Push into place until a click sound is heard.
3. Connect the line cord and the power cable to their corresponding connectors at the bottom of the
base station as shown.
4. Connect the other end of the line cord to the telephone line socket and the other end of the power
cable to the electricity socket.
12
11
13
2
Configure your phone (if necessary)
After charging your phone for a few minutes, a Welcome screen may appear depending on the country
where you live. If the Welcome screen appears:
1. Scroll
:
to the word WELCOME in your preferred language and press
m
SELECT
to confirm
your selection.
2. Scroll
:
to your country and press
m
SELECT
to confirm your selection.
3. Press
:
to your operator (if necessary) and press
m
SELECT
again to confirm your selection.
Set date and time
1. Press
m
MENU
in idle mode, scroll
:
to
Clock & Alarm
and press
m
SELECT
, press
m
SELECT
again to enter
Set Date/Time
.
2. Enter the current time (HH:MM) and current date (DD/MM/YY) and press
m
OK
.
A validation tone is emitted and your phone is now ready for use.
Insert batteries
Charge handset for 24 hours
Enjoy
3
Make a call
Dial the number and press
r
key.
OR
Press
v
key to take the line and dial the number.
Answer a call
When the phone rings, press
r
key.
End a call
To end a conversation, press
e
key.
Adjust earpiece volume
During a call, press
:
to select from
Volume 1
to
Volume 5
.
Store a contact in the phonebook
1. Press
m
MENU
in idle mode, scroll
:
to
Phonebook
and press
m
SELECT
, press
m
SELECT
to
enter
New Entry
.
2. Enter the name of the contact (maximum 14 characters) and press
m
OK
.
3. Enter the phone number and press
m
OK
.
4. Scroll
:
to choose a group (
<No Group>
,
<Group A>
,
<Group B>
,
<Group C>
)
and press
m
SELECT
.
A validation tone is emitted.
Access the phonebook
1. Press
d
in idle mode and scroll
:
to browse the phonebook.
2. To view the details of a phonebook entry, scroll
:
to the phonebook entry and press
m
VIEW
.
3. To dial a number from the phonebook, scroll
:
to the phonebook entry and press
r
.
Set the ring melody
1. Press
m
MENU
in idle mode, scroll
:
to
Personal Set
and press
m
SELECT
, press
m
SELECT
to
enter
Handset Tones
, scroll
:
to
Ring Melody
and press
m
SELECT
.
2. Scroll
:
to your desired melody to play the melody.
3. Press
m
SELECT
to set the ring melody.
A validation tone is emitted and the screen returns to previous menu.
What’s in the box
Handset
Base station for SE745
2 AAA rechargeable
NiMH batteries
Battery door
Power supply
Quick Start Guide
User manual
*You may find in the box the line adaptor delivered separately from the line cable.
In this case, you have
to connect the line adaptor to the line cord first before plugging the line cord to the line socket.
In multihandset packs, you will find one or more additional handsets, chargers with power supply units
and additional rechargeable batteries.
WARNING
Always use the cables and batteries that came with your phone.
Guarantee
Line cord*
Base support
SE745_QSG_US_ENGLISH.fm Page 2 Friday, May 11, 2007 6:21 PM