Philips SPF1007/10 - Manual (Page 17)

1 Settings
6.9 Check the Status of your
Photoframe
You may check the status of your PhotoFrame
how many more photos can be stored, which
media are currently connected, and the
PhotoFrame software version.
1 • Press the Mode button to access the
Main Menu.
• Press Down to highlight Setup and
press Play/OK.
2 • Press Down to go to Status.
• The status of the PhotoFrame is shown in
the right window.
• If you have a memory card in the
PhotoFrame it will give you the status of
the card (card type and free memory left).
Firmware: (PhotoFrame software version)
6.10 Key Help
When the PhotoFrame first starts a description
of the control buttons is displayed for 10
seconds or until the press of any of the buttons.
If you would like to turn this function off follow
the instructions below.
1 • Press the Mode button to access the
Main Menu.
• Press Down to highlight Setup and
press Play/OK.
2 • Press Down to go to Key Help.
• Press Right to go to On or Off.
• Press Down and press Play/OK to
confirm the selection.
Press the Mode button to leave this menu
and play the slideshow.
ENGLISH