ProForm StrideClimber 831.23745.1 - Manual (Page 7)

7
3. Identify the Right Roller Leg (21) and the Right
Pedal Leg (16), which are marked with “R” stick-
ers. Orient the Right Roller Leg and the Right
Pedal Leg as shown.
Apply a small amount of the included grease to
a Roller Axle (24). Attach the Selector (34),
which is located on the Right Pedal Leg (16), to
the Right Roller Leg (21) with the Roller Axle,
two M10 x 25mm x 1.5mm Washers (83), and
two M10 x 15mm Patch Screws (82).
Repeat this step for the Left Roller Leg (not
shown) and the Left Pedal Leg (not shown).
21
16
34
3
24
82
Grease
83 83
82
4. Identify the Right Pedal (15) and the Right Pedal
Leg (16), which are marked with “R” stickers.
Orient the Right Pedal and the Right Pedal Leg
as shown. Attach the Right Pedal with four M6 x
16mm Phillips Patch Screws (87) and four M6
Split Washers (88).
Repeat this step for the Left Pedal (not
shown) and the Left Pedal Leg (not shown).
15
16
4
87
87
88
88