Philips AW2000 - Manual (Page 9)

7
English
EN
3
On the initial Setup page, tap Setup a new
speaker.
4
Read the general setup steps, then tap
Next.
Connect to an existing
speaker system
1
Unscrew the speaker connectors.
2
Insert fully the end of a speaker cable with
red mark into the left red (+) connector.
3
Screw the left red (+) connector to secure
the cable.
4
Insert fully the end of a speaker cable
without red mark into the left black (-)
connector.
5
Screw the left black (-) connector to
secure the cable.
6
Repeat steps 2-5 to insert the other
speaker cable into the right connectors.
Connect power and switch
on
Caution
• Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the device.
•
Risk of electric shock! When you unplug the AC cord,
always pull the plug from the socket. Never pull the
cord.
•
Before you connect the AC cord, make sure that you
have completed all the other connections.