Panasonic KX-TG2431. - Manual (Page 10)

Preparation
10 For assistance, please call 1-800-211-PANA (7262).
Note:
L Use only the included Panasonic AC
adaptor PQLV19.
L
The AC adaptor must remain connected
at all times. (It is normal for the adaptor
to feel warm during use.)
L
The AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
L
The unit will not work during a power
failure. We recommend connecting a
standard telephone to the same
telephone line or to the same telephone
jack using the Panasonic KX-J66 T-
adaptor. Emergency power can be
supplied to the unit by connecting a
Panasonic battery back-up power
supply noted on page 5.
If you subscribe to an xDSL service
L
Please attach a noise filter (contact your
xDSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 26) do not
function properly.
Battery installation
1
Insert the battery ( 1), and press it
down until it snaps into the
compartment (
2).
2
Close the handset cover.
Telephone
line cord
Noise filter
(For xDSL users)
To single-line
telephone
jack (RJ11C)
1
2
TG2431_2432(e).book Page 10 Thursday, February 3, 2005 5:01 PM