Panasonic BB-GT1500 - Manual (Page 8)

– 8 –
Quick troubleshooting
Place the handset on the base unit, then
check if the charge indicator is on.
L Model shown is BB-GT1500.
The charge indicator is OFF.
The charge indicator
is ON.
Unplug the AC adaptor of the base unit and remove the
battery from the handset, then plug in the AC adaptor and
insert the battery into the handset again. Try re-registration
as explained later in this guide.
Lift the handset, then try again.
If handset still shows the same
message, try re-registration as
explained later in this guide.
Re-registration failed.
Re-registration failed.
Your telephone may need service.
“No link to base. Move closer to base, try again.”
Handset shows:
Unplug and then plug AC
adaptor properly to both the
base unit and AC outlet.
BB-GT15xxC_QG(e).fm Page 8 Thursday, June 14, 2007 3:34 PM