Philips MCD710 - Manual (Page 26)

26
English
System Menu Options
Basic operations
1
Press SYSTEM MENU to enter the Setup
Menu.
2
Press 1 2 to select a page to be set.
3
Press 3 4 to highlight an option.
4
Enter its submenu by pressing 2 or OK.
5
Move the cursor by pressing 3 4 to highlight
the selected item.
➜ In cases of value setting , press 1 2 to adjust
values.
6
Press OK to confirm.
To return to the upper-level menu
●
Press 1 or OK (in cases of value adjustment).
To exit from the menu
●
Press SYSTEM MENU again.
➜ The settings will be stored in the player’s
memory even if the player is switched off.
Note:
– Some of the features in the System Menu
Options are described in “Getting Started”.
GENERAL SETUP PAGE
The options included in General Setup page are:
“TV DISPLAY”, “OSD LANGUAGE”, “SCREEN
SAVER”and “DIVX(R) VOD”.
DIVX VOD R
TV DISPLAY
Set the aspect ratio of the DVD Player according
to the TV you have connected.
➜ NORMAL/PS : If you have a normal TV and
want both sides of the picture to be trimmed or
formatted to fit your TV screen.
➜
4:3 NORMAL/LB : If you have a normal TV.
In this case, a wide picture with black bands on
the upper and lower portions of the TV screen
will be displayed.
➜
WIDE : If you have a wide-screen TV.
OSD LANGUAGE
See “Getting Star ted-Step 3: Setting language
preference”.
SCREEN SAVER
This function is used to turn the screen saver on
or off.
➜ ON : In STOP, PAUSE or No DISC mode, if
no actions are performed about 3 minutes, the
screen saver will be activated.
➜ OFF : Screen saver is disabled.
pg 001-040_MCD710_93_Eng 2007.8.29, 11:37 26