PictureTel III ISA - Manual (Page 51)

Completing the Installation and Configuration 3-17
Windows NT
This section describes how to complete the NIC installation
and configuration under Windows NT after you close the
3Com Installation Wizard.
Clicking Finish on the Installation Complete screen closes
the 3Com Installation Wizard. Windows NT then displays the
Adapters tab of the Network screen, as shown in
Figure 3-18 .
.
Figure 3-18 Adapters Tab of the Network Screen
The next step is to install and configure TCP/IP in Windows NT
either manually or automatically.
1 Click Close.
The Microsoft TCP/IP Properties screen appears, as shown in
Figure 3-19 .