Planar PR Line PR5022 - Manual (Page 25)

DLP
®
Projector – User’s Manual
Adjusting the Projector Level
Take note of the following when setting up the projector:
• The projector table or stand should be level and sturdy.
• Position the projector so that it is perpendicular to the screen.
• Be sure cables are not in the way or can cause the projector to be knocked over.
1.
To raise the level of the projector, lift the projector [A] and press the height-
adjuster button [B].
The height adjuster drops down [C].
2.
To lower the level of the projector , press the height-adjuster button and
push down on the top of the projector.
3.
To adjust the angle of the picture, turn the tilt adjuster [D] right or left until
desired angle has been achieved.
– 17 –