Panasonic MC-CG901 - Manual (Page 42)

Belt Changing and Agitator Cleaning
End Cap
Capuchon d’extrémité
Tepa del extremo
Base
Base
Base
Belt Guard
Protège-courroie
Protector de correa
Motor Shaft
Arbre du moteur
Eje del
transmission
del motor
Belt
Courroie
Correa
Tabs
Languettes
Pestaña
➢ ➢ Turn POWER NOZZLE over, raise pile
height adjuster rollers and remove the two
screws from the base.
➢ ➢ Insert and twist flat screwdriver under both
back cover tabs.
➢ ➢ Turn POWER NOZZLE right side up. Tilt
cover forward from back until front snaps
free.
➢ ➢ Carefully insert and lift screwdriver at each
end cap to free agitator from base.
➢ ➢ Remove belt from motor shaft.
To Remove Belt
- 42 -