Parker Hannifin VO40 - Manual (Page 22)

18 Parker Hannifin Corporation
Open-Center Directional Control Valve
VO40
Catalog HY17-8505/UK
[51] – Lever Bracket Note: Handle Levers are sold separately (see PN listed below)
SH
Standard enclosed handle bracket.
SR
Standard enclosed handle bracket, but rotated 180 degrees.
/
No bracket, no handle, no boot (female clevis on spool).
LU
No bracket, but with boot protector at spool end
(female clevis on spool).
MJL Mechanical Joystick – left side version (must be placed on two adjacent work sections).
MJR
Mechanical Joystick – right side version (must be placed on two adjacent work sections).
Handle Rod Assembly is sold as a separate line item PN: K-VO40-H1.
[51C] – Spool Clevis or Handle Bracket Location
This field is used to indicate the location of the handle lever and bracket assembly –
adjacent to port “A” or port “B” side of the work section.
A
Spool Clevis or Handle Bracket on port “A” side.
B Spool Clevis or Handle Bracket on port “B” side.
[52] – Spool Position Indication
/
Without spool position indicator.
SD
With micro-switch on-off indicator (in development).
Ordering Information – Work Sections