Panasonic Aluminum Electrolytic Capacitors NHG - Manual

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ NHG
φ5 to φ8
φD±0.5
φd±0.05
F±
0.5
Sleeve
14 min. 3 min. L ✽
✽ L<16 : L±1.0
L >20 : L ±2.0
Pressure relief
φ6.3<
+
–
φ10<
φD±0.5
■
Features
● Endurance : 105 °C 1000 h to 2000 h
● RoHS directive compliant
Radial Lead Type
Series:
NHG
Type:
A
■
Specifi cations
Category Temp. Range –55 °C to +105 °C –25 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC
Nominal Cap. Range 0.1 µF to 22000 µF 1.0 µF to 330 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent
I < 0.01 CV or 3 (µA) After 2 minutes
(Which is greater)
I < 0.06 CV +10 (µA) After 2 minutes
tan δ Please see the attached standard products list
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration : 6.3 V.DC to 100 V.DC : ( φ5 to φ8)=1000 hours, (φ10 to φ18)=2000 hours
160 V.DC to 450 V.DC : 2000 hours
Capacitance change ±20 % of initial measured value
tan δ < 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
■
Di men sions in mm (not to scale)
W.V.(V.DC) Cap. (µF)
Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 100
0.1 to 33 0.75 1.00 1.55 1.80 2.00
47 to 470 0.80 1.00 1.35 1.50 1.50
1000 to 22000 0.85 1.00 1.10 1.15 1.15
160 to 450 1 to 330 0.80 1.00 1.35 1.50 1.50
■
Frequency correction factor for ripple current
(mm)
Body Dia. φD 5 6.3 8 10 12.5 16 18
Lead Dia. φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
[mm]
Apr. 2008