Proxim AP-4000 - Manual (Page 65)

Advanced Configuration AP-4000 Series User Guide
Interfaces
65
Figure 4-16 Ethernet Sub-tab
For best results, Proxim recommends that you configure the Ethernet setting to match the speed and transmission mode
of the device the Access Point is connected to (such as a hub or switch). If in doubt, leave this setting at its default,
auto-speed-auto-duplex. Choose between:
• 10 Mbit/s - half duplex or full duplex
• 100 Mbit/s - half duplex or full duplex
• Auto speed - auto duplex