Proview XAP series - Manual (Page 15)

Installation
14 Xerox© LCD Monitor User’s Manual
3
Method 2: Digital (DVI) Connection
1
Turn off the computer and unplug the power cable.
2
Connect the signal cable (DVI-I) to the DVI port on the back
of the computer.
3
Connect the audio cable to the line-in port on the back of the
computer.
4
Connect the power cord to wall outlet and LCD monitor.
5
Press the POWER button, located on the bottom side of the
main unit to turn the monitor on, then turn the computer on. If
the monitor displays an image, the monitor is successfully
installed. If no image is displayed, check all connections.
2 Connect to the DVI port
Connect to the
Line-in port
Connect to power source 4