Powerware 5140 - Manual (Page 27)

Installation
19 Powerware ® 5140 User’s Guide
:
www.powerware.com
NOTE Steps 2 through 4 are for EBM installation only. If you do not have optional
EBMs, skip to Step 5 on page 21.
2. Remove the EBM connector cover on the UPS. If a second EBM
is to be used, remove the EBM connector cover on the first EBM
(see Figure 5).
For each EBM connector cover, remove and retain the cover
screw. Discard the cover.
UPS Rear Panel EBM Rear Panel
Figure 5. Removing the EBM Connector Covers