Planet Technology WAP-4030A - Manual (Page 16)

3.1.2.2 Access Filter
This Access Point allows you to provide a Filter List of MAC addresses that are allowed/denied
associating with this AP.
Parameter
Description
MAC Filtering You can enable or disable the MAC Filtering function.
Filter Mode If you select “Only deny PCs with MAC listed below to access this device”, then all the
PCs in the list will be denied to access and all other PCs will be allowed to access. If
you select “Only allow PCs with MAC listed below to access this device”, then all PCs
in the list will be allowed to access but all other PCs will be denied to access.
Filter List Enter the MAC address of PC that will be managed by the MAC Filtering rule.
Please click “Apply” button to save the above configurations.
16