Rmx 2000 leds, Rmx 2000 front panel leds, Rmx 2000 leds -12 – Polycom RMX 2000 User Manual
Page 18: Rmx 2000 front panel leds -12
Chapter 1- Hardware Description
1-12
RMX 2000 LEDs
The RMX includes LEDs located on the front panel and rear panel. In the
front panel, the LEDs reflect the state of the module. The LEDs on the rear
panel indicate the state of the external connections and the status of the
RTM IP board.
RMX 2000 Front Panel LEDs
The following items appear on the RMX 2000 front panel:
Table 1-4
RMX 2000 Front Panel LED’s
Component
LED ID
LED Color
Description
Fan Status
Green
OK.
Red
Warning - Fan failure.
Power Status
Green
OK.
Red
Error - Problem with power supply.
CNTL
ERR
Red
ON - Major system error.
RDY
Green
ON - CPU board has successfully
completed startup.
ACT
Amber
ON - At least one endpoint is
connected to the system.
HD
Red
OFF - Normal.
Flashes - Hard disk is active.
HS
Blue
Flashes - Indicates when the
power down process is initiated on
an MPM board. This Led flashes in
synchronization with the MPM’s
boards HS Led.
ON - CPU may be removed.