Philips SWW1810 - Manual (Page 14)

14
6
Align the adhesive tape on the receiver
with the one on the HDTV until both the
receiver and HDTV are mounted together
firmly.
Note
• The use of adhesive tapes is an alternative mounting
option when the receiver cannot be fixed.
•
When you mount the receiver at the back of the
HDTV, avoid blocking the ventilation holes of the
HDTV.
•
For safety reason, check regularly if the HDTV and
receiver are mounted together firmly.
• The receiver is not recommended for in-the-wall
installation.
Mount your receiver on the
back of the HDTV
1
Remove the white protective film from
one of the supplied adhesive tapes.
2
Secure the glued side of the adhesive tape
and attach it to the central bottom area of
the receiver.
3
Select a flat location on the rear side of
the HDTV.
4
Remove the white protective film from the
other adhesive tape.
5
Secure the glued side of the adhesive tape
and attach it to the selected rear side of
the HDTV.
EN