Panasonic PV-24DF62 - Manual (Page 45)

45
For Your Information
DVD/Video CD/CD
Play fails to start even when
PLAY is pressed...
Play starts but then stops
immediately...
Picture is distorted during rapid
advance or rapid reverse...
No Forward/Reverse search
play...
Play does not start even when
title is selected...
Audio soundtrack and/or
subtitle language is not the one
selected at the initial settings...
No subtitles...
Alternative audio soundtrack
(or subtitle) language cannot
be selected...
Angle cannot be changed...
Correction
• This unit cannot play discs other than DVDs, Video CDs and CDs.
• The disc may be dirty and require cleaning.
• Be sure disc is installed with label side up.
• The picture will be somewhat distorted at times: this is normal.
• Some discs may have sections which prohibit Forward/Reverse
search. (P. 17)
• Confirm the “DVD LOCK” setting. (P. 40)
• If the audio soundtrack and/or subtitle language selected at DVD
initial settings does not exist on the disc, it will not be accessible.
• Subtitles appear only when available on disc.
• Select “ON” at the “subtitle language” section (P. 32) to display
subtitles.
• Alternative language cannot be selected with discs which do not
contain more than one language.
• For some discs, alternative language cannot be selected with the
AUDIO or SUB TITLE button. Try selecting it from the DVD menu
if available.
• This function is dependent on software availability. Even if disc
has multiple angles, they may be recorded for specific scenes
only (ANGLE Indicator on unit lights up). (P. 33)
Correction
• First, unplug unit. Then, prepare a rigid wire (e.g. an extended
paper clip, etc.) and, applying moderate force, insert it straight
into the hole at the base of the tray. The tray will eject a little.
Now, pull the tray all the way out and remove the disc. (P. 7)
Miscellaneous
The disc cannot be removed...
Warning and Instruction Displays
These displays will alert you of a missed operation or provide further instructions.
OSD
NO CH FOUND PLEASE CHECK
ANTENNA CABLE CONNECTION THEN
PRESS CH UP KEY AGAIN
PLEASE SET CLOCK
BEFORE TIMER SETTING
PLEASE CHECK THE DISC, AND FOR
STAINS OR SCRATCHES ON DISC
Caution
• If no active channels are found for
CHANNEL MEMORY...
• If you attempt to set or review a set the
On-Timer and the Clock is not set...
• If you press PLAY, or the unit reads
data from a stained or scratched disc
in DVD mode. Also, if the type of disc is
other than DVD, Video CD or CD...
Page
10
12
4