Connecting a bs digital tuner / digital cs tuner – Panasonic KX-PW301DL User Manual

Page 30

Advertising
background image

30

Connecting a BS digital tuner / Digital CS tuner

more than 1 m

2-pin Telephone Line Cord

within 1~5 m

Plug the AC adaptor into the AC outlet

Connect the telephone line cord
of the tuner to the jack

Turn the portable handset on and place it into the charger.

Place the portable handset and the charger so that the portable handset display shows 3 or more bars. ( )

~

1

Connect to the BS digital tuner / Digital CS tuner.

2

Set up the BS digital tuner / Digital CS tuner.

Set the dialing mode to “Tone”.

Turn the dial tone detection on.

After all the connections and settings are completed, check to make sure the BS digital tuner / Digital CS tuner

is ready for communication.

3

Operate the BS digital tuner / Digital CS tuner.

The portable handset allows you to enjoy BS / CS

digitally broadcast shopping programs or

interactive digital quiz and pay TV programming.

(Contact the broadcasting company for program

fees and other details.)

Note:

You cannot use the BS digital tuner / Digital CS tuner when the dial line is at speeds of 10pps.

You cannot use the Digital CS tuner when the dial line is at speeds of 20pps.

If you connect this unit to ISDN Lines, you cannot use this feature.

When you use Matsushita ISDN Terminal Adaptor (Part no. T0-TAB128D2), you can use Matsushita BS Digital

Hi-vision TV (Part no. TH-36D10) and BS Digital Hi-vision Tuner (Part no. TU-BHD100).

If you connect this unit to a PBX or an adaptor which automatically selects a telephone line, you might not use this

feature.

Advertising