Palsonic PSML-926 - Manual (Page 11)

Continuous playback
Winding
Playing tapes
11
TAPE 1: To playback prerecorded tapes.
TAPE 2: Only to playback prerecorded tapes
and to record tapes.
For tape recording see page 14-15.
button on the machine
Select the TAPE 1 or TAPE 2 function.
Open either tape compartment to load the tape.
Be sure to have the open part of the cassette downwards and the left
hand spool fully wound.
Close the compartment door again, pushing it softly.
Start playback.
TAPE 2 you can start in either direction
Stop playback.
Stop playback.
Fast rewind or advance the tape.
Select the TAPE 2 function in the mode.
Load tapes into both compartments.
Set TAPE 2 to play.
After playing both sides of TAPE 2, the machine
will commence with TAPE 1 (one side).
Select the tape function by pressing the TAPE 1/2 button.
PLAY MODE : Select if the system is to play TAPE 2 in one direction " ", both directions " " or
repeatedly " " using MODE button on the main unit.
The tape counter resets to "0000" when a tape compartment is opened ("0000" need not be the beginning
of the tape).
To find the next piece of music at least 5 sec. free space has to left between the music tracks.
T A P E
p l a y i n g
Skipping a track (AUTO FIND)
During playback.
Fast rewind to the beginning of the current
piece of music or advance to the next piece.
PRESET
FUNCTION
PRESET
PRESET
TUNE TUNE
TUNE TUNE
FUNCTION
CLEAR
CLEAR