Plantronics Voyager - Manual (Page 8)

10 11
EN
Using More Than One Bluetooth Phone
Plantronics Voyager PRO supports multipoint
technology, which allows you to use one
headset with two different Bluetooth mobile
phones. To pair your headset to a second
phone, see “Pairing Your Headset” on page 4.
How to Initiate a Call
The headset initiates or redials a call on the
phone that most recently made an outgoing call.
To use the second phone, initiate the call using
the controls on that phone. The second phone
forms an active link with the headset.
NOTE The headset cannot place a current call
on hold while answering a call from the second
phone.
How to Answer a Call While Talking on
the Other Paired Phone
To answer a second call, the current call must
be terminated or transferred back to the first
phone. To transfer the call, see “Headset
Controls” on page 8.
NOTE If you choose not to answer the second
call, and you have voice mail on the second
phone, the call will go to voice mail.
1 Terminate the current call.
Tap the call control button.
2 Answer the second call.
Tap the call control button again.
TIP To avoid issues switching between calls,
use the call control button on the headset rather
than your phone controls.
Headset Controls and Indicators
Action Indicator LED Tone
Redial Double-tap call
control button. None Double low tone
Voice-activated redial
(if supported by phone) Press call control
button for 1 second. None Single low tone (phone
may then prompt you to
say a command)
Call indicator LED
(enable/disable) With headset powered
on, press power,
volume + and - buttons
simultaneously for 1
second. Turn indicator on : blue glow
increases for 2 seconds.
Turn indicator off:
blue glow
fades for 2 seconds
Single low tone
Reconnect after leaving
Bluetooth range range for
more than 30 seconds Tap call control button. Single blue flash Single low tone
dUrATIOn: TAP is under 1 second. PRESS is 1-4 seconds as directed.