ProForm 831.29533.0 - Manual (Page 7)

7
2. Insert the tab on one of the Handrail Brackets (17) into the
slot in the right Upright (38). Attach the Handrail Bracket
with a 3/4” Screw (5) and a Star Washer (25).
Attach the
other Handrail Bracket to the left Upright (not shown)
in the same way.
5
25
38
17
Slot
3. Identify the Right Handrail (16), which has a large hole in
the left side. Feed the Upright Wire (53) into the hole in
the bottom of the Right Handrail and out of the large hole
in the side. Note: It may be helpful to use needlenose pli-
ers to pull the Wire Harness out of the hole.
Press a Handrail Cap (103) onto the lower end of the
Right Handrail (16) as shown. Set the Right Handrail on
the right Upright (38), while sliding the lower end of the
Right Handrail onto the Handrail Bracket (17). Attach the
Right Handrail with an Upright Bolt (44) in the upper end
and a 3/4” Screw (5) and a Star Washer (25) in the lower
end.
Attach the Left Handrail (4) in the same way. Note:
There is not a wire harness on the left side.
53 Hole
16
44
44
4
103
5
25
25
38
17
Hole
2
3
4. Attach the ground wire to the small hole in the side of the
Right Handrail (16) with a Silver Ground Screw (99).
Ground
Wire
16
99
4
5