Philips Noreico 4608 - Manual (Page 6)

6. 7.
4 Brush the inside of housing and Razor Head Assembly.
5 Replace the Razor Head Assembly back on razor.
Every Two Months:Razor Heads
1 Turn razor OFF by locking switch to “OFF” position and
disconnect from outlet.
2 Remove Razor Head Assembly from housing unit.
3 Brush the inside of the housing.
4 Turn Razor Head Assembly over so that the
underside is exposed.
5 Press down and turn wheel of frame counterclockwise.
6 Remove the frame and brush clean.
TRIMMING
To groom sideburns and moustache:
1 Turn razor ON by locking the switch to the “ON” position.
2 Push up Trimmer Slide Switch.
3 Hold Trimmer as shown and move in downward strokes
with gentle pressure.
4 Close Trimmer by sliding Trimmer switch down.
5 Turn razor OFF by locking switch to the “OFF” position.
CLEANING
Once A Week:Razor
1 Turn razor OFF by locking switch to “OFF” position.
2 Clean the top of the razor with the supplied brush.
3 Remove Razor Head Assembly from the razor unit.