Pantech WV-NW474S - Manual (Page 53)

-53-
■ Customizing Alarm Notice E-Mail
You can customize the contents of e-mails notifying the recipient of alarm events and their dates.
Take the following steps:
Step 1
Create an alarm e-mail as shown below using any text editor, and save it as "almmail.tmpl" in text file format on
your PC.
Example of text file (almmail.tmpl)
Alarm arisen at %h%i
Date : %y. %m. %d %t
Number of alarm images: %n
URL of Alarm Image: %u
Display example
Alarm arisen at NW474 192.168. 0.10
Date: 2003.02.04 13:55:40
Number of alarm image: 5
URL of Alarm Image: http://192.168.0.10/ ALM0000_00.jpg
Table of Substitution letters
File Name: almmail.tmpl, a template for alarm e-mail notifications.
Use the provided file name.
Step 2
Start up the Windows DOS prompt and connect by inputting the IP address of the unit.
For the FTP software, use the user name and administrator password (level 1) registered in the User Setting win-
dow.
If no administrator has been registered, proceed as follows:
User Name: admin
Password: None
Step 3
Upload the file(almmail.tmpl) to this unit.
Notes:
• Do not upload with FTP when connecting with low baud rate lines such as ISDN.
• To display "%" enter the symbol twice as "%%".
Item Substitution Letter Description (indication type etc.)
Alarm date (year) %Y 4-digit-indication 2000 to 2099
Alarm date (year) %y 2-digit-indication 00 to 99
Alarm date (month) %m 2-digit-indication 01 to 12
Alarm date (month) %M 3-letter-indication Jan to Dec
Alarm date (day) %d 2-digit-indication 01 to 31
Alarm date (time) %t hour:minute:second 24-hour indication
Sender E-mail Address %s
Host address of camera %i 192.168.0.1 type indication
Origin of alarm %p Terminal, VMD
File name of alarm image %f ALM0000_00.JPG type indication
URL of alarm image %u http://192.168.0.1/ALM0000_00.JPG
(IP address) Blank appears in case of no file.
Number of alarm image %n 0 to 40