Panasonic TU-HDT105A - Manual (Page 11)

Operating Instruction Book
TU-HDT105A
elect
When all formats have been tested, a list of all accepted video formats will be
displayed. You will have the option to accept this list or to start the procedure again.
The accepted display formats are then
displayed and you are requested to s
your preferred display format, or to select
Dynamic Format Selection. When
Dynamic Format Selection is selected,
the digital receiver will choose the best
format for the received digital program.
The selected output format can be
changed at any stage in the Video menu
(section 6.3)
Your display device supports the following formats:
576i
576p
1152i
1080i
720p
Press 1 to accept this list.
Press 2 to do testing again.
NOTE : Anytime you change the rear panel switch or change display device, you will
have to restart the procedure again.
4.3 State & Territory Selection
The first time the digital receiver is installed,
or after default settings are restored (section
6.5), please select the state or territory that
you live in. This will enable the digital
receiver to display the correct local time.
4.4 Power Saving Timer
This function requires a time to be set for the automatic shutdown of the digital
receiver. The receiver will automatic go into standby to save power. The time is set
from the last received command sent to the receiver. The default setting is 4 hours.
4.5 Auto Scan Channel
The first time the digital receiver is installed, or after default settings are restored
(section 6.5), the digital receiver will automatically scan for available digital services.
This will take around five minutes or so.
11