Panasonic KX-FPG378 - Manual (Page 19)

1. Introduction and Installation
17 For Fax Advantage assistance, call 1-800-435-7329.
1.9 Battery installation
1 Insert the battery ( 1), and press it down until
it snaps into the compartment.
2 Close the battery cover.
1.10 Battery replacement
If battery performance diminishes, make sure
you have cleaned the charge contacts and fully
charged the battery. After recharging if
“
Recharge battery” is displayed and/or
68879 continues to flash, or “ Charge for 6h”
and 68889 are displayed, the battery needs to be
replaced.
Please use only Panasonic battery. See page
9 for accessory information.
L Only use rechargeable battery. If you
install non-rechargeable battery and start
charging them, the battery may leak
electrolyte.
1 Press the notch on the battery cover firmly,
and slide the cover.
2 Replace the old battery with a new one, and
close the cover (see the battery installation
procedure on page 17).
Attention:
A nickel metal hydride battery that is recyclable
powers the product you have purchased.
Please call 1-800-8-BATTERY for information on
how to recycle this battery.
1
FPG379-PFQX2138ZA-en.book Page 17 Wednesday, January 12, 2005 4:49 PM