Pioneer PDP 503CMX - Manual (Page 16)

10
En
English
Installation and Connections
Installation and Connections
Installation of the Unit
Installation using the supplied display stand
Be sure to fix the supplied stand to the installation
surface.
Use commercially available M8 bolts that are 25 mm
longer than the thickness of the installation surface.
1 Fix the supplied stand to the installation surface at
each of the 4 prepared holes using commercially
available M8 bolts .
2 Set this unit in the stand.
Front
Rear
110 mm (4- 5 / 16 in.)
Use a 6 mm hex wrench
to bolt them.
CAUTION
This display unit weighs at least 67 lbs (30 kg) and has little front-
to-back depth, making it very unstable when stood on edge. As a
result, two or more persons should cooperate when unpacking,
moving, or installing the display.
3 Fix this unit using the supplied washer and bolt.
PDP-503CMX: 798 mm (31- 7 / 16 in.)
PDP-433CMX: 768 mm (30- 1 / 4 in.)