Planar PT170 - Manual (Page 8)

7
u u u u uRemove the Back Cover
Please follow the instruction to remove the cover on the back panel of the
LCD so that you can connect the cables in ”Connector Ports B.”
1. To remove the back cover, follow the arrows in Figure A and press with
both your thumbs. The cover should be easily removed by pressing firmly.
2. Follow the instruction on P.9 (Figure 9.1) to connect the cables in
“Connector Ports B.”
3. Fix the cover back to the LCD. You may also keep the cables in order
with the cable organizer.
Cable
Organizer
Note: You can place the LCD horizontally to make it easier to connect
the cables. Please make sure that you place it on an even surface lest
the LCD should be damaged by scratches or collision.
A
Back Cover