Philips 8040X - Manual (Page 10)

ENGLISH
◗ Make sure shaving conditioner is always
released from both holes in the Razor Head
Assembly. If not, thoroughly clean razor (see
‘Cleaning’ section).
◗ The razor will not perform optimally when
used without shaving conditioner on a wet face.
9 Turn razor off by pressing the on/off
button once.
10 Clean razor after EACH use (see ‘Cleaning’
section).
C
11 Put Protective Razor Head Cap on the
razor when you store it to prevent the
shaving heads from getting damaged.
Replace Razor Head Assembly (model
HS85) once a year for optimal shaving
results.
12 You may store your razor in the charging
stand. Unplug from the outlet when
charging is complete.
Trimming
To Groom Sideburns and Moustache:
1 Turn razor OFF.
18 ENGLISH
C
2 Remove Razor Head Assembly from the
razor by pulling the Razor Head Assembly
straight up away from the razor.
3 Remove trimmer from the trimmer
storage compartment on the charging
stand.
C
4 Fit the trimmer onto the razor (you will hear
a click). The trimmer is now ready for use.
5 Activate trimmer by pressing the on/off
button once.
Do Not Press Shaving Conditioner Button While
Using Trimmer
To Use Trimmer:
1 Turn razor ON.
C
2 Hold trimmer to exact hairline desired.
Move trimmer downward with gentle
pressure.
3 Trim beard, moustache or sideburns using
the trimmer.
19